Before installing the artificial turf, you should:

1. Remove the weeds and natural grass on the soil/ground.
2. Compact the sub-base (soil/ concrete) and make sure it’s flat and smooth.
3. Make sure the back of the grass and joint tape are dry and clean before installation.

We suggest that you should install your turf on a dry day at the temperature between 10-30℃. Work in humid and rainy day is not suggested, because the joints will be easily loosened.

Lay out your turf:

If you have more than one rolls, be sure the blades are facing the same direction, Stretch the rolls and carefully nudge it into the right position.

Cut and trim:

Trim or cut the extra edges with a carpet cutter or a razor knife from the back. Be sure to cut the carpet a little larger to ensure full coverage and avoid visible seams.

Seaming:

This part is a little bit trickier. For concrete base, you need to prepare joint tapes (non self-adhesive) and glue (as shown below).